Name: Dell Alienware Area-51 ALX SX2210 Webcam Driver for Windows 7 x64
Version: A00-00
Size: 155.38 MB
Category:Digital Camera & Webcam
License: Free
Released: 2013-12-11
Developer:
Downloads: 708

Specifications:
Processor and System Chipset
- Processor Intel Core i7
- L2 cache 256 KB
- L3 cache up to 8 MB
- Bus clock 133 MHz
- System chipset Intel X58 Express DRAM bus width 64 bits
- Data bus bandwidth up to 6.4 GT/s
- Processor data width 64 bits
- BIOS chip (NVRAM) 32 Mb
- RAID support (internal SATA drives only)
- RAID 0
- RAID 1
- RAID 5
- RAID 10
Memory
- Connectors: three internally-accessible DIMM sockets
- Capacities 2 GB and 4 GB
- Memory types 1066 MHz DDR3, 1333 MHz DDR3, and 1600 MHz XMP
- Minimum 6 GB
- Maximum 12 GB
Back Panel Connectors
- IEEE 1394 one 6-pin serial connector
- Network adapter: two 10/100/1000 Mbps RJ45 connectors
- USB: six 4-pin USB 2.0-compliant connectors
- eSATA: one 4-pin eSATA connector
- S/PDIF: one optical and one coaxial output connector
- PS/2: two 6-pin PS/2 connectors
- Audio: 7.1 channel line output, stereo microphone and stereo line in connectors
- Expansion slots: eight full-height expansion slot openings to six physical expansion slot connectors on the system board
Top Panel Connectors
- IEEE 1394: one 6-pin serial connector
- USB: three 4-pin USB 2.0-compliant connectors
- eSATA one 4-pin eSATA connector
- Audio stereo headphone and microphone connectors
Communications
- Network adapter 10/100/1000 Mbps Ethernet LAN on system board
- Wireless Bluetooth wireless technology, WiFi (optional)
Video type: three PCI Express x16 connectors for full-length add-in graphics card(s)
Audio type: integrated 7.1 channel, High Definition Audio with S/PDIF support, Realtek ALC888 codec
Expansion Bus
- 1x124-pin PCI connector
- 2x36-pin PCI Express x1 connector
- 3x164-pin PCI Express x16 connector
Drives
- Externally accessible: three 5.25-inch drive bays for Blu-ray Disc combo, Blu-ray Disc Writer, DVD+/-RW, or DVD Combo; one 3.5-inch drive bay for Media Card Reader
- Internally accessible: six 3.5-inch drive bays for SATA-II hard drives
Power
- Wattage: 1000 W or 1100 W
- Voltage: 100-240 V AC, 50-60 Hz
Dimensions
- Width 249 mm (9.8 inches)
- Depth 635 mm (25 inches)
- Height: with top vents closed 557.6 mm (22 inches), with top vents open 595.5 mm (23.4 inches)
- Weight (starting at) 31.7 kg (70 lb)
Please do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.
Note: Try to set a system restore point before installing a device driver. It will help you restore system if installed driver not complete.

Hi all,
I am the owner of an Alienware Area 51 x58 desktop from 2009 with intel i7 920 chips.
An APC battery backup recently failed and when it went down it caused the pc to restart several times. During the last restart, when I finally got the PC off the battery (which was making it's warning sound), a message came up during reboot that I have never seen before. It basically said that overclocking had failed and it wanted me to start the machine with the default values. I did so, and I haven't seen any message since.
But now I'm wondering if the factory-set overclocking has been turned off and needs to be turned back on. I have a few questions.
1. Did the Area 51 x58 ship overclocked to 3.2 from 2.67?
2. How do you turn it back on if it has gone off?
I read a very thorough posting on this at the Dell forums that said to turn it back on you needed to hit F2 during startup and then F9. Well I tried hitting F2 and it brought up the boot manager, but there was no F9 option and nothing about overclocking.
I tried to use intel's extreme turning utility, but pretty much everything was grayed out and I didn't understand it anyway.
I have never overclocked or tried to overclock before, so whatever overclocking was on was set by Alienware back in 2009.
Thanks for any help!